During the process of selecting a steel oval pipe for your development, three elements must be taken into account. Most commonly, sizes range from 3” to 6”, thicknesses are either 18 gauge or 20 gauge, and finishes include galvanized and hot-dipped galvanized. However, alternative options for all three categories are also available.
After determining the size, heft and coating of your steel oval pipe, it is time to begin your project. To commence, you must saw the pipe to the desired length. Luckily, this tool can easily be obtained at a nearby hardware shop. Place the cutter over the top of the pipe and spin it around until the blade cuts through. Once that is accomplished, you are ready to advance to the next step.
Through to the next stage in the process, you will need to sand down the edges of the pipe. Whether you decide to invest in a power sander or rely on a more hands-on approach, the same principle still applies—start with a coarser grade of sandpaper and work your way up gradually to a finer grit. Sand carefully until the entire edge of the pipe is completely smooth and refined.
When you reach the stage of painting the pipe, pick a paint that suits your needs – opting for an outdoor-grade formula if the pipe is going to be exposed to the elements. Coat it evenly with your brush or roller, starting from the top and working down. When you’ve completed the painting, you can proceed on to the successive steps.
To complete the installation, you will need to set the pipe. This can be accomplished via a few methods – screwing it in, welding it, or adhering it using glue. Whichever choice you make, take care to ensure that the pipe is firmly fixed before continuing forward.
Installing the steel oval pipe marks the commencement of its utility. There are multiple ways to use this efficient component, such as offering structural support, or acting as a drainage line. Whichever manner you decide to implement it, make sure to read any instructions on its components prior to application.
Post time: 2023-06-12